Overview
Provide electronic control of intermittent pilot ignition systems used on gas-fired furnaces, boilers and other heating appliances.
Features
- Provide ignition sequences, flame monitoring and safety shutoff for intermittent pilot central furnaces and heating appliances.
- Functional equivalent of S86, S860, and S90 modules. Include spark cable adapter to allow field replacement of S86, S860, and S90 without replacing existing spark cable.
- Include relay contacts for use with any intermittent pilot gas control string with maximum 1.0A pilot and 2.0A main valve rating; VR8204, VR8304, or VR8440 combination gas control recommended.
- S8610F is for use with natural gas only; modules do not provide 100 percent pilot gas shutoff if pilot fails to light.
- S8610H; S8670D are for use with natural or LP gas; modules provide 100 percent pilot gas shutoff and lockout if pilot fails to light.
Product Specifications
- Dimensions (in.)
- 3 15/16 in. high x 5 7/16 in. wide x 2 5/8 in. deep
- Dimensions (mm)
- 100 mm high x 138 mm wide x 67 mm deep
- Item Type
- Product
- Electrical Ratings
- 24 Vac
- Frequency
- 60 Hz
- Approvals, Canadian Standards Association
- Design Certified
- Flame Failure Response Time (sec)
- 2 seconds maximum
- PrePurge
- None
- Ambient Temperature Range (C)
- -40 C to +79 C
- Ambient Temperature Range (F)
- -40 F to +175 F
- Ignition System Type
- Intermittent Pilot
- Ignition Sequence
- Continuous Retry
- Typical Gas Control
- VR8204, VR8304
- Type of Gas
- Natural or LP
- Flame Sense
- Single Rod
- Ignition Source
- Internal high voltage spark generator
- Ignition Trials To Lockout
- continuous retry
- Lockout Timing
- continuous retry
- Ignition Trial Time (sec)
- 90 sec
- Maximum Valve Load @ 24 Vac (Amps)
- 1A Pilot, 2A Main @ 24Vac
- Typical Ignition Hardware
- Q345, Q3451, Q3452
- Between Trial Time (sec)
- 5 minute delay after failed trial for ignition.
There is no literature attached to this product, please try another material search. If you believe that there should be literature for this product, please contact Customer Care for website support.