Overview
Control central heating and cooling, fan coil systems, radiators and convectors. Depending on the model, it can be controlled by a low voltage SPST or SPDT switch, pulse-width modulated 24 Vac signal, or floating input, modulating controller.
Features
- Use with two-way or three-way valves.
- Double insulated actuator.
- Five foot plenum-rated cable.
- Quick and easy replacement of moving parts.
- Actuator head installation does not require draining the system.
- Selectable/switchable electronic fail safe normally open or normally closed.
- Available with valve bodies with 1000-series 2-way and 6000-series 3-way cartridges for new construction.
- All VC Series actuator-valve combinations provide 60 psi close-off.
Product Specifications
- Application
- HVAC
- Dimensions (in.)
- 2.8 in. high x 3.7 in. wide x 2.7 in. deep
- Dimensions (mm)
- 70 mm high x 94 mm wide x 68 mm deep
- Includes
- 3/8 in. flex conduit adapter; Valve body
- Used With
- VC Series Valve
- Weight (lb)
- 0.84 lb
- Weight (kg)
- 0.38 kg
- Materials
- Plastic housing
- Mounting
- Direct Coupled
- Frequency
- 50 Hz
- Approvals, Underwriters Laboratories Inc.
- UL Recognized, File# MH11826
- Approvals, Canadian Standards Association
- CSA Certified: LR1322-367
- Electrical Connections
- Plenum-rated cable
- Operating Humidity Range (% RH)
- 5 to 95% RH, non-condensing
- Supply Voltage
- 24 Vac
- Power Consumption
- Driving-- 6 VA, 3W standby for anticipator
- Shipping and Storage Temperature Range (F)
- -40 F to +150 F
- Shipping and Storage Temperature Range (C)
- -40 C to +65 C
- Approvals, CE
- 89/336/ECC, 73/23/EEC
- Ambient Temperature Range (C)
- 0 C to 65 C
- Ambient Temperature Range (F)
- 32 F to 150 F
- Switch Ratings
- 2.2A (5 to 110 Vac)/1.0A (110 to 277 Vac) Inductive; Min. DC switching capability: 5 mA @ 24 Vac.
- Environmental, Electrical or Ingress Protection Rating
- IP40,Double Insulated
- Internal Auxiliary Switch
- 1
- Fluid Temperature (C)
- 95 C
- Fluid Temperature (F)
- 203 F
- Actuator Type
- Valve
- Control Signal
- SPST; Two position
- Fail Safe Mode
- Stays in place
- Switches
- SPDT
- Stroke (in.)
- 0.4 in.
- Stroke (mm)
- 10 mm
- Cable
- Molded strain relief
- Timing, Nominal
- Driving @ 60 Hz-- 6 sec
- Maximum Differential Pressure Ratings (Close-off) (psi)
- 60 psid
- Maximum Differential Pressure Ratings (Close-off) (kPa)
- 400 kPa
- Shaft Adapter Type
- Self-alignment
- Manual operation
- Lever
There is no literature attached to this product, please try another material search. If you believe that there should be literature for this product, please contact Customer Care for website support.