Overview
L4029E Reset Limit Control opens a line or low voltage circuit if the air temperature reaches a critical level. L4029E acts as a fire thermostat in the ducts of AC & ventilating systems. If the air temperature indicates a fire, the fan is shut down.
Features
- Shuts off the fan when air temperature is indicative of fire.
- Internal snap-acting switch actuated by a bimetal strip inserted directly into the air stream responds rapidly to temperature changes.
- Requires manual reset.
Product Specifications
- Dimensions (in.)
- 3 3/4 in. high x 2 5/16 in. wide x 2 in. deep excluding element.
- Dimensions (mm)
- 95 mm high x 59 mm wide x 51 mm deep excluding element.
- Item Type
- Product
- Electrical Ratings
- Limit- (AFL)-- 2 A @ 30 Vac: 10 A @ 120 Vac: 5 A @ 240 Vac; Limit- (ALR)-- 60 A @ 120 Vac: 30 A @ 240 Vac
- Approvals, Underwriters Laboratories Inc.
- Listed: File No. MP466, Vol. 8, Guide No. MBPR2
- Approvals, Canadian Standards Association
- Certified: File No. LR95329-5
- Temperature Ratings (C)
- Maximum Ambient-- At switch 88 C: At element: 177 C
- Temperature Ratings (F)
- Maximum Ambient-- At switch: 190 F: At element: 350 F; High Limit Stop--125 F
- Switching Action
- Normally closed SPST switch opens on temperature rise to the set point. Switch must be manually reset to operate.
- Element Insertion Length (in.)
- 3 in.
- Element Insertion Length (mm)
- 76 mm
- Pilot Duty Ratings
- 0.25 A @ 0.25 to 12 Vdc
There is no literature attached to this product, please try another material search. If you believe that there should be literature for this product, please contact Customer Care for website support.
