Skip Ribbon Commands
Skip to main content
SharePoint
  • Product Info
  • Literature

Overview

Two-Position Draft Damper Actuators. Use with two-wire 24V room thermostats or other low voltage controllers to operate the draft damper on solid fuel furnaces or boilers and other similar light duty applications.

Features

  • Low voltage, spring-return damper actuator.
  • Equipped with mounting bracket for wall, duct or direct appliance mounting to control draft damper through an actuator arm or chain linkage arrangement.
  • Actuator wheel rotates in a clockwise direction (when facing the wheel) when energized.

Product Specifications

Dimensions (in.)
3 1/2 in. high x 2 5/8 in. wide x 3 5/16 in. deep
Dimensions (mm)
89 mm high x 119 mm wide x 75 mm deep
Includes
38 in. linkage chain
Weight (lb)
1.8 lb
Item Type
Product
Mounting
Foot mounted. Direct Coupled
Frequency
60 Hz
Operating Humidity Range (% RH)
5 to 95% RH
Supply Voltage
24 Vac
Operating Temperature Range (F)
40 F to 125 F
Operating Temperature Range (C)
5 C to 50 C
Timing
Run Time Maximum-- 20 sec
Stroke
Angle of Rotation-- 45 degrees maximum
Control Signal
Two position, SPST
Fail Safe Mode
Spring Return
Torque Rating (lb-in.)
1.9 lb-in.
Torque Rating (Nm)
0.21 Nm
External Auxiliary Switches Available
No
Motor shafts
1, Round
There is no literature attached to this product, please try another material search. If you believe that there should be literature for this product, please contact Customer Care for website support.