Overview
These ignition modules provide ignition sequence, flame monitoring and safety shutoff for intermittent pilot central furnaces and heating appliances.
Features
- Provide up to 1.0 A pilot and 1.0 main valve current rating.
- Use a separate igniter and sensor (Q179C with igniter and sensor mounted on one bracket, or Q354 sensor with Q345, Q346, Q348, Q362 or Q381 igniter-sensor recommended.)
- Can be used on natural on LP gas; they provide 100 percent shutoff on ignition failure.
- Lock out on shutoff.
- Manual reset is required.
Product Specifications
- Dimensions (in.)
- 3 15/16 in. high x 5 7/16 in. wide x 2 5/8 in. deep
- Dimensions (mm)
- 100 mm high x 138 mm wide x 67 mm deep
- Item Type
- Product
- Electrical Ratings
- 24 Vac
- Frequency
- 60 Hz
- Approvals, Canadian Standards Association
- Design Certified
- Flame Failure Response Time (sec)
- 2 seconds maximum
- PrePurge
- None
- Ambient Temperature Range (C)
- -40 C to +79 C
- Ambient Temperature Range (F)
- -40 F to +175 F
- Ignition System Type
- Intermittent Pilot
- Ignition Sequence
- Lockout
- Typical Gas Control
- VR8204, VR8304
- Type of Gas
- Natural or LP
- Flame Sense
- Single Rod
- Ignition Source
- Internal high voltage spark generator
- Ignition Trials To Lockout
- 1
- Lockout Timing
- 90 seconds
- Ignition Trial Time (sec)
- 90 sec
- Maximum Valve Load @ 24 Vac (Amps)
- 1A Pilot, 1A Main @ 24Vac
- Typical Ignition Hardware
- Q345, Q3451
There is no literature attached to this product, please try another material search. If you believe that there should be literature for this product, please contact Customer Care for website support.
