Overview
Provide electronic control of direct spark ignition systems, with external spark transformers, used on gas-fired furnaces, boilers, conversion burners and other heating appliances.
Features
- Controls ignition sequence and gas control operation in direct spark ignition systems.
- Control separate 120 Vac spark generator that provides high voltage potential for main burner ignition.
- Lockout after one trial for ignition if main burner fails to ignite.
- Reset from thermostat after lockout. Use separate electrodes for spark ignition and flame sensing.
- Use any 24 Vac combination gas control designed for direct spark applications and rated at 2.0A or less.
Product Specifications
- Dimensions (in.)
- 5 1/4 in. high x 4 1/16 in. wide x 1 15/16 in. long
- Dimensions (mm)
- 133 mm high x 103 mm wide x 49 mm deep
- Item Type
- Product
- Electrical Ratings
- 24 Vac
- Frequency
- 60 Hz
- Approvals, Canadian Standards Association
- Design Certified
- Flame Failure Response Time (sec)
- 2.0 sec. @ 2.5 microamp
- Ambient Temperature Range (C)
- -40 C to +79 C
- Ambient Temperature Range (F)
- -40 F to +175 F
- Ignition System Type
- Direct Spark Ignition
- Ignition Sequence
- Single trial for main burner ignition (then shut down and lockout)
- Typical Gas Control
- VR8205, VR8305
- Type of Gas
- Natural or LP
- Flame Sense
- Two Rod
- Ignition Source
- External (120 VAC powered) High Voltage Spark Generator
- Ignition Trials To Lockout
- 1
- Lockout Timing
- 4 sec.
- Ignition Trial Time (sec)
- 4 sec.
- Maximum Valve Load @ 24 Vac (Amps)
- 2A
- Flame Failure Re-ignition Time (sec)
- 0.8 sec. maximum
There is no literature attached to this product, please try another material search. If you believe that there should be literature for this product, please contact Customer Care for website support.
