Overview
This system is specially designed for large floor heating applications exceeding 15A.
Features
- Here's how it works
- A floor heating area exceeding 15A is separated into zones, with a linked unit responsible for heating each zone.
- All linked units are controlled by a master thermostat responsible for settings/programming of the entire floor.
- No settings dial. Settings controlled by master means units can be installed anywhere
- ON/STANBY switch enables unit's heating area to be shut down independently of other heating areas
- Built-in GFCI/EGFPD with test light. No need to buy separate safety cutoff.
Product Specifications
- Application
- Master unit for radiant floor
- Dimensions (in.)
- 4.9 in. X 2.8 in. X 0.9 in.
- Dimensions (mm)
- 124 mm X 70 mm X 23 mm
- Includes
- Aube AC112-01 15-feet / 4.6-m floor sensor
- Used With
- Aube CT230-120GA, CT230-120GB, CT230-240GA or CT230-240GB Floor Heating Slave Units; Aube AC112-01 North American Floor Sensor (15-feet / 4.6-m)
- Comments
- With Backlit Display; works with up to 10 CT230 slave units
- Item Type
- Product
- Mounting
- Vertical
- Electrical Ratings
- Maximum Load: 75 mA @ 12 VDC
- Approvals, Canadian Standards Association
- Approved; Compliant to CAN/CSA-C828-06
- Electrical Connections
- 6 in. (150 mm) tinned copper lead wires
- Supply Voltage
- 75 mA @ 12 VDC
- Switch Positions (System)
- AF (ambient + floor)/ F (floor only); Display format: F/12 h or C/24h; Early Start function: Enabled or Disabled
- Operating Temperature Range (F)
- 32 F to 122 F
- Operating Temperature Range (C)
- 0 C to 50 C
- Power Method
- Hardwired
- Ambient Temperature Range (C)
- 0 C to 60 C
- Ambient Temperature Range (F)
- 32 F to 140 F
- Color
- White
- Sensor Element
- Thermistor
- Switch Type
- Relay
- Programmability
- 7 Day program
- Temperature Control Mode Selections
- Ambient Air; Floor
- Setting Temperature Range (F)
- Ambient: 40 F to 86 F; Floor limit: 40 F to 104
- Setting Temperature Range (C)
- Ambient: 5 C to 30 C; Floor limit: 5 C to 40 C
- Parts Needed for Operation (not included) - Non-Zoned System
- Must be linked to at least 1 slave unit (CT-230-XXXXXX)
There is no literature attached to this product, please try another material search. If you believe that there should be literature for this product, please contact Customer Care for website support.