Overview
One-Pipe Steam Thermostatic Radiator Valves - Allow automatic temperature control in one-pipe steam or hot water systems for free standing radiators, convectors and other heating units with standard capacity requirements. Provide comfort and energy savings.
Features
- Continually monitors and adjusts room temperature for consistent comfort and relief from under-heating and overheating.
- Adjustable balancing cartridge design made from resilient material (EPDM), ensures tight shut-off on steam and hot water systems.
- Nickel plated brass casted body.
- Replaceable cartridge for easy service with service tool.
- Controls include valve body, steam air vent.
- Used with T100 set point and capillary actuators.
- No electrical connection required for non-electric actuators.
- Normally open without control mounted.
Product Specifications
- Application
- Use where installation space is limited
- Dimensions (in.)
- 1 1/8 in. x 2 5/8 in.
- Dimensions (mm)
- 29 mm x 66 mm
- Temperature Range (F)
- 248 F Maximum
- Temperature Range (C)
- 120 C Maximum
- Used With
- T100C,T100B,T100F
- Connection Size (in.)
- 3/4 in.
- Connection Type
- Inlet--NPT; Outlet--Threaded
- Capacity
- Standard
- Body Pattern
- Angle
- Pressure Ratings (psi)
- Hot Water--150 psi maximum; Steam--15 psi maximum
- Pressure Ratings (kPa)
- Hot Water--1034 kPa maximum; Steam--103 kPa
- Pipe Size (inch)
- 3/4 in.
- Pipe Size (DN)
- DN20
- Maximum Differential Pressure Ratings (Close-off) (psi)
- With T100 or T200: 15 psi,With MV100: 36 psi,For low noise: 3 psi
- Maximum Differential Pressure Ratings (Close-off) (kPa)
- With T100 or T200: 103 kPa,With MV100: 248 kPa,For low noise: 20 kPa
- Capacity (Cv)
- 2.7 Cv
- Capacity (Btu/hr-steam)
- 63,800 Btu/hr
- Materials (Body)
- Nickel Plated Bronze
- Cartridge Change Tool
- Yes - Use VA8200A001
There is no literature attached to this product, please try another material search. If you believe that there should be literature for this product, please contact Customer Care for website support.
