Sales (2)
| Title | Date Posted | Size | ||
|---|---|---|---|---|
| CE Not Required Memo D06F-1ZH_doc-ml0h | 10/2023 | 182194 kb |
PDF
|
|
| D04FM,D05FS,D05FT,D06F,D06FH,D06FI,D06FN Hygienic Certificate (Polish) | 10/2023 | 306526 kb |
PDF
|
Submittal (0)
| Title | Date Posted | Size | ||
|---|---|---|---|---|
| No results found for "brochure". |
Training (0)
| Title | Date Posted | Size | ||
|---|---|---|---|---|
| No results found for "brochure". |
Install (14)
| Approvals and Standards | DVGW, WRAS (up to 23 °C) |
|---|---|
| Connection Size | 3/4 in |
| Filter Mesh Size | 0.16 mm |
| Inlet Pressure (Max) | 16 bar |
| Valve Body Material | Brass, Dezincification Resistant |
| Warranty | 5 years |
| Valve Type | Pressure Regulating Valve |
| DN Size | DN 20 |
| Controlled Media | Drinking Water |
| Pressure Drop (Min) | 1 bar |
According EN 806-2 pressure reducing valves of this type protect household water installations against excessive pressure from the supply. They can also be used for industrial or commercial applications within the range of their specification. By installing a pressure reducing valve, pressurisation damage is avoided and water consumption is reduced.
The set pressure is also maintained constant, even when there is wide inlet pressure fluctuation. Reduction of the operating pressure and maintaining it at a constant level minimizes flow noise in the installation.
- Inlet pressure balancing - no influence on outlet pressure by fluctuating inlet pressure
- Up to size 1 1/4 in approved by LGA for low noise, Group 1 without limitations
- The valve insert is of high quality synthetic material and can be fully exchanged
- Also available without fittings
- Conforms to BSEN 1567
- All materials are UBA conform
- All materials are ACS approved