Sales (0)
| Title | Date Posted | Size | ||
|---|---|---|---|---|
| No results found for "brochure". |
Submittal (0)
| Title | Date Posted | Size | ||
|---|---|---|---|---|
| No results found for "brochure". |
Training (0)
| Title | Date Posted | Size | ||
|---|---|---|---|---|
| No results found for "brochure". |
Install (7)
| Title | Date Posted | Size | ||
|---|---|---|---|---|
| Installation Instructions for S9240F2055 Modulating Integrated Furnace Control (English) | 08/2019 | 1323853 kb |
PDF
|
|
| Installation Instructions for S9240F2053 Modulating Integrated Furnace Control (English) | 10/2019 | 1549291 kb |
PDF
|
|
| Installation Instructions for S9240F2060 Modulating Integrated Furnace Control (English) | 12/2022 | 1327137 kb |
PDF
|
|
| S9240F2002 Modulating Integrated Furnace Control (English) | 06/2020 | 1247303 kb |
PDF
|
|
| S9240F2044 Modulating Integrated Furnace Control Installation Instructions (English) | 06/2020 | 1343432 kb |
PDF
|
|
| Installation Instructions: S9240F3007 Modulating Integrated Furnace Control (English) | 05/2025 | 1372415 kb |
PDF
|
|
| Installation Instructions: S9240F3015 Modulating Integrated Furnace Control (English) | 05/2025 | 1326531 kb |
PDF
|
| Application | Warm Air Furnace |
|---|---|
| Ignition Type | Direct Hot Surface |
| Ignition Source | Hot Surface |
| Ignition Trial Time | 4 seconds |
| Ignitor Electrical Rating | 1.0 A resistive at 95 V AC output |
| Ignition Trials To Lockout | Five total; four retries if flame is not sensed on the first trial |
| Interpurge | 15 Seconds |
| Postpurge | 5 Seconds |
| Pre-Purge | 15 Seconds |
| Flame Failure Response Time | 2 seconds maximum |
| Flame Sense | Remote |
| Heat Fan Off Delay Timing | 60, 90, 120, or 180 Seconds |
| Heat Fan On Delay Timing | 30 Seconds |
| Cool Fan Off Delay Timing | 2 Seconds |
| Cool Fan On Delay Timing | 2 Seconds |
| Auto Reset Delay Timing | 60 minutes (after Soft Lockout) |
| Current Draw | 0.5 A Input Current plus valve load and optional 24 VAC humidifier load at 24Vac |
| Humidifier Load Rating | Line Voltage Humidifier: 1 A resistive load maximum @ 120 V AC, Low Voltage Humidifier (option): 1 A resistive load maximum @ 24 V AC |
| Circulator Load Rating | 14.5 FLA/25 LRA max @ 120 V AC |
| Induced Draft Blower Rating | 33-110 V AC; 45-180 Hz;, 1.1 A @ 110 Vac 3-phase (full load) |
| Typical Gas Control | VK8105R or VR9205R variable firing rate, 24 Vac valve |
| HSI Warmup Time | 20 Seconds |
| Supply Voltage | 24 V |
| Set point Temperature (Min) | -40 °F, -40 °C |
| Set point Temperature (Max) | 175 °F, 79 °C |
| Output Type | Hot Surface |
| Frequency | 50 Hz, 60 Hz |
| Operating Voltage | 24 V |
| Ambient Operating Temperature (Max) | 175 °F, 79 °C |
| Ambient Operating Temperature (Min) | -40 °F, -40 °C |
| Shipping and Storage Temperature (Max) | 185 °F, 85 °C |
| Shipping and Storage Temperature (Min) | -40 °F, -40 °C |
| Operating Relative Humidity (Max) | 95% at 104 °F non-condensing |
| No overview is available for this product. |