Sales (0)
| Title | Date Posted | Size | ||
|---|---|---|---|---|
| No results found for "brochure". |
Submittal (0)
| Title | Date Posted | Size | ||
|---|---|---|---|---|
| No results found for "brochure". |
Training (0)
| Title | Date Posted | Size | ||
|---|---|---|---|---|
| No results found for "brochure". |
Install (3)
| Title | Date Posted | Size | ||
|---|---|---|---|---|
| Braukmann SM110 Installation instructions | 04/2020 | 1026320 kb |
PDF
|
|
| Braukmann SM110 Product Specification (Polish) | 04/2023 | 1467859 kb |
PDF
|
|
| Braukmann SM110 Product Specification (Czech) | 01/2024 | 3388849 kb |
PDF
|
| Product Features | Certified to Pressure Equipment Directive 2014/68/EU, reference no.: CE 0035, For heating systems according to EN 12828, EN ISO 4126-1 and EN 2516-2, Protected against subsequent resetting, Easy venting, Standardised discharge connection |
|---|---|
| Includes | Security cap with part label, Angled housing |
| Connection Type | Internal Thread |
| Inlet Connection Size | Rp 1/2 in IG |
| Inlet Connection Type | 1/2 in internal threads on inlet, 3/4 in on outlet |
| Outlet Connection Size | Rp 3/4 in |
| Controlled Media | Water-Glycol Mixture according to VDI 2035 |
| Media Temperature (Max) | 120 °C |
| Ambient Operating Temperature (Min) | 5 °C |
| Ambient Operating Temperature (Max) | 55 °C |
| Ambient Relative Humidity (Min) | 25% Non Condensing |
| Ambient Relative Humidity (Max) | 85% Non Condensing |
| Operating Pressure (Max) | 3 bar |
| Color | Gold |
| Material Finish | Angled brass housing, spring steel adjustment spring, high grade synthetic material security cap with part label, hot water resistant elastomer diaphragm |
| Valve Body Material | Brass |
| Valve Diaphragm Material | Hot water resistant elastomer |
| Valve Security Cap Material | High-quality Synthetic |
Diaphragm safety valves of this type are used to protect closed heating systems according to EN 12828. In accordance with statutory requirements, the diaphragm safety valve is preset to the required fixed set pressure by the manufacturer and is sealed with an embossed security cap marked with the test badge and pressure rating to prevent unauthorised tampering with the setting. Subsequent alteration of the setting is not permitted and is impossible without destroying the security cap. The preset pressure is embossed on the security cap.
- Certified to Pressure Equipment Directive 2014/68/EU, refernce no.: CE035
- For heating systems according to EN 12828, EN ISO 4126-1 and EN 2516-2
- Protected against subsequent resetting
- Standardised discharge connection