Sales (0)
| Title | Date Posted | Size | ||
|---|---|---|---|---|
| No results found for "brochure". |
Submittal (0)
| Title | Date Posted | Size | ||
|---|---|---|---|---|
| No results found for "brochure". |
Training (0)
| Title | Date Posted | Size | ||
|---|---|---|---|---|
| No results found for "brochure". |
Install (3)
| Title | Date Posted | Size | ||
|---|---|---|---|---|
| Installation Instructions for WV8840A Water Heater Controls (English) | 09/2019 | 1104111 kb |
PDF
|
|
| Installation Instrucitons for WV8840A Water Heater Controls (English) | 05/2020 | 1148527 kb |
PDF
|
|
| Advanced Gas Valve Changes - Legacy Product Document | 12/2010 | 529315 kb |
PDF
|
| Application | Water Heater Control |
|---|---|
| Approvals and Standards | CSA Certified: ANSI Z21.20, ANSI Z21.23, ANSI Z21.78, ANSI Z21.87, CAN/CSA-C22.2 No. 199-M89, CAN1-6.6-M78, CSA 4.6, CSA 6.20 |
| Capacity (Min) | 30 Btuh |
| Capacity (Max) | 75 Btuh |
| Ignition Type | Standing Pilot with Peizo |
| Type of Fuel | LPG |
| Sensor Type | NTC thermistor |
| Body Pattern | 90 degree |
| Inlet Pressure (Max) | 0.5 psi, 14.0 in w.c. |
| Control Input Voltage (Min) | 850 mV dc, open circuit |
| Control Input Voltage (Max) | 350 mV dc, open circuit |
| Mounting Type | Mount in the upright position |
| Inlet Connection Size | 1/2 in |
| Inlet Connection Type | NPT |
| Outlet Connection Size | 1/2 in |
| Outlet Connection Type | Inverted Flare |
| Set point Temperature (Min) | 55 °F, 13 °C |
| Set point Temperature (Max) | 155 °F, 68 °C |
| TCO Cutout Temperature | 189 °F, 87 °C |
| Shipping and Storage Temperature (Min) | -40 °F, -40 °C |
| Ambient Operating Temperature (Max) | 150 °F, 66 °C |
| Ambient Operating Temperature (Min) | 32 °F, 0 °C |
| Shipping and Storage Temperature (Max) | 150 °F, 66 °C |
| Operating Relative Humidity (Max) | 95% Non-condensing at 104 °F, 95% Non-condensing at 40 °C |
| Warranty | 1 Year |
The WV8840A is powered from a thermopile heated by the standing pilot flame. CS8840 pilot assemblies are designed for use with this control.
The immersion well for sensing water temperature has matched NTC thermistor sensors. These sensors provide the fail-safe mechanism through which the WV8840A can provide both accurate water temperature control as well as water temperature limit (Temperature Cut-Out [TCO]) function.