Overview
Two-Position Draft Damper Actuators. Use with two-wire 24V room thermostats or other low voltage controllers to operate the draft damper on solid fuel furnaces or boilers and other similar light duty applications.
Features
- Low voltage, spring-return damper actuator.
- Equipped with mounting bracket for wall, duct or direct appliance mounting to control draft damper through an actuator arm or chain linkage arrangement.
- Actuator wheel rotates in a clockwise direction (when facing the wheel) when energized.
Product Specifications
- Dimensions (in.)
- 3 1/2 in. high x 2 5/8 in. wide x 3 5/16 in. deep
- Dimensions (mm)
- 89 mm high x 119 mm wide x 75 mm deep
- Includes
- 38 in. linkage chain
- Weight (lb)
- 1.8 lb
- Item Type
- Product
- Mounting
- Foot mounted. Direct Coupled
- Frequency
- 60 Hz
- Operating Humidity Range (% RH)
- 5 to 95% RH
- Supply Voltage
- 24 Vac
- Operating Temperature Range (F)
- 40 F to 125 F
- Operating Temperature Range (C)
- 5 C to 50 C
- Timing
- Run Time Maximum-- 20 sec
- Stroke
- Angle of Rotation-- 45 degrees maximum
- Control Signal
- Two position, SPST
- Fail Safe Mode
- Spring Return
- Torque Rating (lb-in.)
- 1.9 lb-in.
- Torque Rating (Nm)
- 0.21 Nm
- External Auxiliary Switches Available
- No
- Motor shafts
- 1, Round
There is no literature attached to this product, please try another material search. If you believe that there should be literature for this product, please contact Customer Care for website support.