Product Specifications
- Application
- Hydronic Control
- Comments
- Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water. Valve designed for cycling (not constantly powered on) applications. Hot water use only.
- Frequency
- 50 Hz
- Approvals, Canadian Standards Association
- CSA Certified: File 1322
- Operating Humidity Range (% RH)
- 5 to 95% relative humidity, non-condensing.
- Voltage
- 230 Vac; Power Consumption--7 VA
- Ambient Temperature Range (C)
- 50 C Maximum
- Ambient Temperature Range (F)
- 122 F Maximum
- Connection Type
- BSPP-INT
- Electrical Connections (in.)
- 39 in. cable
- Electrical Connections (mm)
- 1 meter cable
- Timing
- Nominal Open--15 sec
- Body Pattern
- Two-way, Straight-through
- Pipe Size (inch)
- 3/4 in.
- Pipe Size (DN)
- DN20
- Current Draw
- 0.03A
- Fluid Temperature (C)
- 5 C to 88 C
- Fluid Temperature (F)
- 40 F to 190 F
- Maximum Differential Pressure Ratings (Close-off) (psi)
- 8 psi
- Maximum Differential Pressure Ratings (Close-off) (kPa)
- 55 kPa
- Capacity (Cv)
- 8 Cv
- Capacity (Kv)
- 6.9 Kv
- Valve Action
- Spring return to close
- Valve Type
- Zone Valve
- Materials (Body)
- Brass
- Materials (Seat)
- Brass
- Materials (Stem)
- Stainless Steel
- Actuation
- Two position
- De-energized Position
- Normally Closed
- Auxiliary End Switch
- SPDT
- Static Pressure Rating (psi)
- 300 psi
- Static Pressure Rating (kPa)
- 2000 kPa
- Materials (Plug/Ball/Disc)
- Buna-N (NBR) Rubber Ball
- Materials (Packing)
- EPDM rubber
- Manual Opener
- Yes
There is no literature attached to this product, please try another material search. If you believe that there should be literature for this product, please contact Customer Care for website support.