Skip Ribbon Commands
Skip to main content
SharePoint
Login or Register to view pricing and order.
Item 17 Of 17
3/4 in. NPT x 3/4 in. NPT Intermittent Hot Surface Pilot Ignition SmartValve® Control with step opening and Full Rate: 10.0 in. wc; Step Setting: 2.5 in. wc pressure regulator setting

SV9602P4832/U

Intermittent hot surface pilot SmartValve® control. Step Rate 2.5" WC; Full Rate 10.0" WC

  • Product Info
  • Literature

Overview

The SmartValve® System Controls combine gas flow control and electronic intermittent pilot sequencing functions into a single unit. This product family offers several different intermittent pilot sequences for a wide range of applications. The specific application of the SmartValve System is the responsibility of the appliance manufacturer. They are directly compatible with the Q3450 or Q3480 Intermittent Pilot burners used with the original controls on the appliance.

Features

  • Suitable for a wide range of gas-fired appliances including residential furnaces, roof-top furnaces, residential boilers, unit heaters, infrared heaters, space heaters and commercial cooking units.
  • Ignition sequence includes timed trial for ignition.

Product Specifications

Dimensions (in.)
3.2 in. wide x 4.9 in. high x 4.1 in.long
Dimensions (mm)
81 mm wide x124 mm high x 104 mm long.
Includes
Two 3/4 x 1/2 in. reducer bushings; Extension harness
Item Type
Product
Mounting
0 to 90 degrees in any direction from the upright position of the gas control knob, including vertically.
Electrical Ratings
24 Vac
Frequency
50 Hz; 60 Hz
Approvals, Canadian Standards Association
CSA International: 112395
Tradeline Value
Universal
Flame Failure Response Time (sec)
1.6 sec @ 3 µA
PrePurge
30 seconds
Ambient Temperature Range (C)
-40 C to +79 C
Ambient Temperature Range (F)
-40 F to +175 F
Ignition System Type
Intermittent Hot Surface Pilot Ignition
Ignition Sequence
Intermittent Pilot
Type of Gas
LP
Flame Sense
HSI
Ignition Source
Pilot
Ignition Trials To Lockout
continuous retry
Ignition Trial Time (sec)
90 sec
Typical Ignition Hardware
Q3450; Q3480
Body Pattern
Straight-through
Opening Characteristics
Step
Pressure Regulator Setting (psi)
Full Rate: 10.0 in. WC; Step Setting: 2.5 in. WC non--adjustable
Pressure Regulator Setting (kPa)
Full Rate: 2.49 kPa; Step Setting: 0.62 kPa
Pressure Ratings (psi)
1/2 psi
Pressure Ratings (kPa)
3.5 kPa
Inlet/Outlet Size (in.)
3/4 in. NPT x 3/4 in. NPT.
Pilot Gas Outlet
Yes
Capacity (ft³/hr)
Maximum at 1 in. P.D.--300 ft³/hr; Maximum--415 ft³/hr; Minimum--30 ft³/hr
Capacity (m³/hr)
Maximum at 1 in. P.D.--8.5 m³/hr; Maximum--11.8 m³/hr; Minimum--0.8 m³/hr
Pressure Tapping
1/8 in. - NPT