Skip Ribbon Commands
Skip to main content
SharePoint
Item 1 Of 2
Dual Voltage Line Volt Secondary Unit

CT230-GA/U

Dual Voltage Line Volt Secondary Unit for Floor Heating over 15 A, with 5 mA GFCI

  • Product Info
  • Literature

Overview

This system is specially designed for large floor heating applications exceeding 15A.

Features

  • Here's how it works
  • A floor heating area exceeding 15A is separated into zones, with a linked unit responsible for heating each zone.
  • All linked units are controlled by a master thermostat responsible for settings/programming of the entire floor.
  • No settings dial. Settings controlled by master means units can be installed anywhere
  • ON/STANBY switch enables unit's heating area to be shut down independently of other heating areas
  • Built-in GFCI/EGFPD with test light. No need to buy separate safety cutoff.

Product Specifications

Application
Electric Heating; Linked unit for radiant floor
Dimensions (in.)
4.9 in. X 2.8 in. X 0.9 in.
Dimensions (mm)
122 mm X 70 mm X 23 mm
Used With
Aube TH114-AF-12VDC Primary Thermostat, Aube TH115-AF-12VDC Primary Thermostat
Comments
Works with TH114-AF-12VDC & TH115-AF-12VDC Primary Thermostats
Item Type
Product
Mounting
Vertical
Electrical Ratings
3600 W @ 240V; Maximum Load: 15 A (resistive only); 1800 W @ 120 V
Frequency
60 Hz
Approvals, Canadian Standards Association
Approved
Electrical Connections
6 in. (150 mm) tinned copper lead wires
Supply Voltage
120 Vac; 240 Vac
Operating Temperature Range (F)
32 F to 122 F
Operating Temperature Range (C)
0 C to 50 C
Power Method
Hardwired
Color
White
Ambient Temperature Range (F)
On Primary Thermostat
Ambient Temperature Range (C)
On Primary Thermostat
Switching Action
DPST
Switch Type
Relay
Programmability
On Primary Thermostat
Setting Temperature Range (F)
On Primary Thermostat
Setting Temperature Range (C)
On Primary Thermostat
Parts Needed for Operation (not included) - Non-Zoned System
Aube TH114-AF-12VDC or Aube TH115-AF-12VDC Primary Thermostats