My Account | homeowners link | resideo.com

CT230-GA/U

Dual Voltage Line Volt Secondary Unit for Floor Heating over 15 A, with 5 mA GFCI

This product is available in the US only.

Overview

This system is specially designed for large floor heating applications exceeding 15A.

Here's how it works
A floor heating area exceeding 15A is separated into zones, with a linked unit responsible for heating each zone.
All linked units are controlled by a master thermostat responsible for settings/programming of the entire floor.
No settings dial. Settings controlled by master means units can be installed anywhere
ON/STANBY switch enables unit's heating area to be shut down independently of other heating areas
Built-in GFCI/EGFPD with test light. No need to buy separate safety cutoff.

Application: Electric Heating; Linked unit for radiant floor
Dimensions (in.): 4.9 in. X 2.8 in. X 0.9 in.
Dimensions (mm): 122 mm X 70 mm X 23 mm
Used With: Aube TH114-AF-12VDC Primary Thermostat, Aube TH115-AF-12VDC Primary Thermostat
Comments: Works with TH114-AF-12VDC & TH115-AF-12VDC Primary Thermostats
Item Type: Product
Mounting: Vertical
Electrical Ratings: 3600 W @ 240V; Maximum Load: 15 A (resistive only); 1800 W @ 120 V
Frequency: 60 Hz
Approvals, Canadian Standards Association: Approved
Electrical Connections: 6 in. (150 mm) tinned copper lead wires
Supply Voltage: 120 Vac; 240 Vac
Operating Temperature Range (F): 32 F to 122 F
Operating Temperature Range (C): 0 C to 50 C
Power Method: Hardwired
Ambient Temperature Range (C): On Primary Thermostat
Ambient Temperature Range (F): On Primary Thermostat
Color: White
Switching Action: DPST
Switch Type: Relay
Programmability: On Primary Thermostat
Setting Temperature Range (F): On Primary Thermostat
Setting Temperature Range (C): On Primary Thermostat
Parts Needed for Operation (not included) - Non-Zoned System: Aube TH114-AF-12VDC or Aube TH115-AF-12VDC Primary Thermostats