Y8610U6006/U

Converts atmospheric standing pilot gas systems to intermittent pilot. Max capacity of 270kBtuh

Product Info
Literature

Overview

Intermittent Pilot Retrofit Kits save energy by converting atmospheric standing pilot systems to intermittent pilot. Typical applications are gas-fired atmospheric furnaces, boilers and heating appliances.

Features

Use with natural or LP gas
Includes gas valve, ignition module, pilot burner hardware, ignition cable, and wiring harness
Provides 100 percent pilot gas shutoff if pilot fails to light; after 6-minute delay, trial for ignition is repeated.
Ignition trail/delay sequence is repeated until the appliance lights or call for heat is removed..

Product Specifications

Dimensions (in.): 3 15/16 in. high x 5 7/16 in. wide x 2 5/8 in. deep
Dimensions (mm): 100 mm high x 138 mm wide x 67 mm deep
Includes: VR8304M3558 (1/2 x 3/4; 3.5" setting; 270kBtu/hr at 1 in. p.d.)
Item Type: Product
Electrical Ratings: 24 Vac
Frequency: 60 Hz
Flame Failure Response Time (sec): 2.0 sec
PrePurge: 0 or 30 seconds
Ambient Temperature Range (C): -40 C to +74 C
Ambient Temperature Range (F): -40 F to +165 F
Ignition System Type: Intermittent Pilot
Ignition Sequence: Continuous retry, after trial for ignition, pilot gas shuts off for 5 minutes, then another trial for pilot ignition takes place
Typical Gas Control: VR8204, VR8304
Type of Gas: Natural or LP
Flame Sense: Single Rod or Two Rods
Ignition Source: Internal high voltage spark generator
Ignition Trials To Lockout: continuous retry
Lockout Timing: 15 or 90 seconds
Ignition Trial Time (sec): 15 or 90 seconds
Maximum Valve Load @ 24 Vac (Amps): 1A Pilot, 2A Main @ 24Vac
Typical Ignition Hardware: Q345, Q3451